DAP-1360 Wireless N300 Access Point & Router
User Manual
Creating Static IP + PPPoE WAN Connection
To create a connection of the Static IP + PPPoE type, click the Add button on the Net / WAN page.
On the opened page, select the Static IP + PPPoE value from the Connection Type drop-down
list and specify the needed values.
Figure 145. The page for creating a new connection. The General settings section.
Parameter
Interface
Name
Enable
Direction
General settings
A physical interface to which the new connection will be assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 181 of 270
Configuring Device (Router Mode)
Description