DAP-1360 Wireless N300 Access Point & Router
User Manual
Later you will be able to add wireless devices to the WLAN by pressing the WPS/RESET button of
the access point.
1. Select the PBC method in the software of the wireless device that you want to connect to the
access point's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the WPS/RESET button of the access point, hold it for 2 seconds, and release. The
WPS LED will start blinking.
Page 65 of 270
Configuring Device (Access Point Mode)