Setting Of The Skip Of Steps; Using The Simple Operation Mode - JUKI AMS-224EN-4530 Instruction Manuals

(5) Setting of the skip of steps

It is possible to set the skipping of sewing of a given step.
If you want to skip the sewing of a certain step within the combination data, use this function.
A
B
C

2-23. Using the simple operation mode

With IP-420, the SIMPLE OPERATION mode is available.
① Entering the skip setting mode
Press mode changeover button
B.
mode
② Pressing the button of the step to be skipped.
Press button C of the step to display
"Skip". Another press on the button resets the skip setting. It is
possible to set two or more steps to "Skip".
D
E
When all skip button
is pressed, the skip can be set for all steps or the skip setting
can be reset for all steps. Note that the sewing screen is not
displayed even by pressing the set ready key when all steps
are set to "Skip".
① Select the sewing mode.
When the
A
A is displayed on the screen. When this button
button
is pressed, the screen mode is changed over between the nor-
mal operation and the simple operation.
When the normal operation is selected:
When the simple operation is selected:
– 60 –
A to select skip setting
E or all skip reset button
key is pressed, SCREEN MODE SELECT
. The step is set to
D