JUKI AMS-224EN-4530 Instruction Manuals page 92

No.
Feeding frame control : pedal open/close
Operation order of feeding frame by pedal operation
at the normal time is set.
0 : Solid presser (Right pedal)
1 : Right/left separated presser (Without priority of right/left)
2 : Right/left separated presser (In the order of right to left)
3 : Right/left separated presser (In the order of left to right)
4 to 7 : Special type (*1)
8 : Solid presser (Left pedal)
9 : Solid presser 2-step stroke
10 : Right/left separated presser 2-step stroke (Without right/left separation)
11 : Right/left separated presser 2-step stroke (Order of right to left)
12 : Right/left separated presser 2-step stroke (Order of left to right)
13 to 99 : Solid presser
* For the AMS-224EN6060, only the memory switch "0" can be used.
*1 : When using these items, refer to Engineer's Manual.
* Settings 9 to 12 are only enabled for the 2-step stroke type.
Feeding frame control : midway stop time open/close
Operation order of feeding frame by pedal operation
when lifting the feeding frame by the temporary stop
command in the pattern data is set.
0 : Solid presser (Right pedal)
1 : Right/left separated presser (Without priority of right/left)
2 : Right/left separated presser (In the order of right to left)
3 : Right/left separated presser (In the order of left to right)
4 to 7 : Special type (*1)
8 : Solid presser (Left pedal)
9 : Solid presser 2-step stroke
10 : Right/left separated presser 2-step stroke (Without right/left
separation)
11 : Right/left separated presser 2-step stroke (Order of right to left)
12 : Right/left separated presser 2-step stroke (Order of left to right)
13 to 99 : Solid presser
* For the AMS-224EN6060, only the memory switch "0" can be used.
*1 : When using these items, refer to Engineer's Manual.
* Settings 9 to 12 are only enabled for the 2-step stroke type.
Pedal SW1 with/without latch
Without
Pedal SW2 with/without latch
Without
Pedal SW3 with/without latch
Without
Pedal SW4 with/without latch
Without
Item
With
With
With
With
– 88 –
Setting range
Edit unit
4530/6030 6060
0 to 99 1
0 to 99 1
--- ---
--- ---
--- ---
--- ---