Mechanical Section (With Regard To The Sewing Machine); Specifications - JUKI AMS-224EN-4530 Instruction Manuals

I. MECHANICAL SECTION (WITH REGARD TO THE SEWING MACHINE)

1. SPECIFICATIONS

1 Sewing area
2 Max. sewing speed
3 Settable stitch length
4 Feed motion of feeding frame
5 Needle bar stroke
6 Needle
7 Lift of feeding frame
8 Intermediate presser stroke
9 Lift of intermediate
presser
10 Intermediate presser
DOWN position
variable
11 Shuttle
12 Lubricating oil
13 Memory of pattern
data
14 Temporary stop facility
15 Enlarging / Reducing
facility
16 Enlarging / Reducing
method
17 Max. sewing speed
limitation
18 Pattern selection
facility
19 Bobbin thread counter
20 Sewing counter
21 Memory back-up
22 2nd origin setting
facility
23 Sewing machine motor
24 Dimensions
25 Mass (gross mass)
26 Power consumption
27 Operating temperature
range
28 Operating humidity range
29 Line voltage
30 Air pressure used
31 Air consumption
32 Needle highest
position stop facility
33 Noise
X (lateral) direction Y (longitudinal) direction
AMS-224EN-4530 : 450 mm
AMS-224EN-6030 :
2,500 sti/min (When sewing pitch is 3 mm or less)
0.1 to 12.7 mm (Min. resolution : 0.05 mm)
Intermittent feed (2-shaft drive by stepping motor)
41.2 mm
DP x 17
Max. 30mm
4 mm (Standard) (0 to 10 mm)
20 mm
Standard 0 to 3.5 mm (Max. 0 to 7.0 mm)
Double-capacity semi-rotary hook
New Defrix Oil No. 2 (Supplied by oiler)
• Main body : Max. 999 patterns (Max. 50,000 stitches/pattern)
• External media : Max. 999 patterns (Max. 50,000 stitches/pattern)
Used to stop machine operation during a stitching cycle.
Allows a pattern to be enlarged or reduced on the X axis and Y axis independently
when sewing a pattern. Scale : 1% to 400% times (0.1% steps)
Pattern enlargement / reduction can be done by increasing / decreasing either stitch
length or the number of stitches. (Increasing/decreasing stitch length only can be
performed when pattern button is selected.)
200 to 2,500 sti/min (Scale : 100 sti/min steps)
Pattern No. selection method
UP/DOWN method (0 to 9,999)
UP/DOWN method (0 to 9,999)
In case of a power interruption, the pattern being used will automatically be stored in
memory.
Using jog keys, a 2nd origin (needle position after a sewing cycle) can be set in the
desired position within the sewing area. The set 2nd origin is also stored in memory.
Servo-motor
AMS-224EN-4530 : 1,703mm (W) x 1,370mm (L) x 1,200mm (H) (Excluding thread stand)
AMS-224EN-6030 : 1,923mm (W) x 1,370mm (L) x 1,200mm (H) (Excluding thread stand)
AMS-224EN-4530 : 401 kg
AMS-224EN-6030 : 410 kg
550 VA
5˚C to 35˚C
35 % to 85 % (No dew condensation)
Rated voltage ±10% 50 / 60 Hz
AMS-224EN-4530 : 0.5 to 0.55 MPa (Max. 0.55 MPa)
AMS-224EN-6030 : 0.5 to 0.55 MPa (Max. 0.55 MPa)
3
1.8 dm / min (ANR)
After the completion of sewing, the needle can be brought up to its highest position.
- Equivalent continuous emission sound pressure level (L
A-weighted value of 83.5 dB ; (Includes K
-ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (L ) :
WA
A-weighted value of 92.5 dB ; (Includes K
-ISO 3744 GR2 at 2,500 sti/min.
– 1 –
× 300 mm
600 mm × 300 mm
= 2.5 dB) ; according to ISO 10821- C.6.3
pA
= 2.5 dB) ; according to ISO 10821- C.6.3
WA
) at the workstation :
pA