3-5. Installing the air hose
❶
Close
Open
3-6. Installing the eye protection cover
WARNING :
Be sure to attach this cover to protect the eyes from the disperse of needle breakage.
A
❷
❶
1) Connecting the air hose
❷
Connect the air hose to the regulator .
2) Adjustment of air pressure
Open air cock ❶ , pull up and turn air adjust-
ment knob ❷ and adjust so that air pressure
indicates 0.5 to 0.55 MPa (Max. 0.55 MPa).
Then lower the knob and fix it.
* Close air cock ❶ to expel air.
Use eye protection cover ❶ after securely attach-
ing it on face plate cover ❸ with screw ❷ .
❸
– 7 –
To prevent interference with the feed-
ing frame, be sure to install the thread
stand guide arm (asm.) with the eye
protection cover pressed in the direc-
tion of A.