JUKI AMS-224EN-4530 Instruction Manuals page 66

Button and display
A
THREAD CLAMP button
B
PRESSER DOWN button
C
BOBBIN WINDER button
D
PATTERN NO. SETTING
button
E
PATTERN TYPE SETTING
button
F
PATTERN LIST button
G
NEEDLE THREAD
TENSION SETTING
button
H
MAX SPEED LIMITATION
SETTING button
I
INTERMEDIATE
PRESSER HEIGHT
REFERENCE VALUE
SETTING button
J
PLUS button
K
MINUS button
L
PATTERN NAME display
Effective/ineffective of thread clamp is selected.
: Thread clamp ineffective
: Thread clamp effective
Feeding frame and intermediate presser are lowered and the presser down
screen is displayed.
Bobbin thread can be wound.
→ Refer to
"II-2-11. Winding bobbin thread"
Pattern No. is set.
Registered pattern No. is retrieved using PLUS button J and MINUS button K.
Pattern type is specified. The pattern type is changed over among the following
three different ones using PLUS button J and MINUS button K to select a
desired one.
: User's pattern
: M3 data
: Direct pattern
The selected pattern type is indicated on edit data display Q.
*A type to which no pattern is registered cannot be selected.
Pattern No. and type which are currently selected are indicated on the button.
When the button is pressed, the selected pattern list screen is displayed for the
pattern selection.
The current needle thread tension reference value is indicated on the button.
When the button is pressed, the thread tension reference value can be changed.
During the setting procedure, the thread tension reference value is indicated on
edit data display Q.
The thread tension value is increased/decreased in increments of 1 using PLUS
button J or MINUS button K.
→ Refer to
"II-2-6. Changing item data"
The current max. speed limitation is indicated on the button. When the button is
pressed, the max. speed limitation can be changed. During the setting procedure,
the max. speed limitation is indicated on edit data display Q.
The max. speed limitation is increased/decreased in increments of 100 sti/min
using PLUS button J or MINUS button K.
→ Refer to
"II-2-6. Changing item data"
The current intermediate presser height reference value is indicated on the
button. When the button is pressed, the intermediate presser height reference
value can be changed. During the setting procedure, the intermediate presser
height reference value is indicated on edit data display Q.
The intermediate presser height reference value is increased/decreased in
increments of 0.1 mm using PLUS button J or MINUS button K.
→ Refer to
"II-2-6. Changing item data"
The value for the selected item is increased in increments of the reference unit.
The value for the selected item is decreased in increments of the reference unit.
The name of the currently selected pattern is displayed.
– 62 –
Description
p.37.
: Vector form data
: Standard format of sewing
p.29.
p.29.
p.29.