JUKI AMS-224EN-4530 Instruction Manuals page 69

Button and display
A
PATTERN BUTTON MOVE
button
B
THREAD CLAMP button
C
PRESSER DOWN button
D
RETURN TO ORIGIN
button
E
SHAPE CHECK button
F
COUNTER VALUE
CHANGE button
G
CLEAR button
H
NEEDLE THREAD
TENSION SETTING
button
I
INTERMEDIATE
PRESSER HEIGHT
REFERENCE VALUE
SETTING button
J
SPEED CHANGE button
K
PLUS button
L
MINUS button
The pattern button move screen is displayed.
→ Refer to
"II-2-10. When setting of sewing product is difficult because of
interruption of needle tip"
Effective/ineffective of thread clamp is selected.
: Thread clamp ineffective
: Thread clamp effective
Feeding frame and intermediate presser are lowered and the presser down
screen is displayed.
The work clamp is returned to the start of sewing and raised to its upper position
at the time of a temporary stop.
The shape of the pattern which is being selected is checked using PLUS button
K or MINUS button L. The current number of stitches is indicated on edit data
display S.
→ Refer to
"II-2-7. Checking pattern shape"
The counter value is changed using PLUS button K or MINUS button L. The
counter value is indicated on the button. When the button is pressed, G is
displayed to allow the counter value to be changed.
The current counter value is indicated on edit data display S.
→ Refer to
"II-2-12. Using counter"
The counter value is cleared.
* This button is displayed only when COUNTER VALUE CHANGE button F is
being selected.
The current needle thread tension reference value is indicated on the button.
When the button is pressed, the reference value of the thread tension can be set.
During the setting procedure, the thread tension reference value is indicated on
edit data display S.
The thread tension value is increased/decreased in increments of 1 using PLUS
button K or MINUS button L.
The thread tension can be changed even during sewing.
The current intermediate presser height reference value is indicated on the
button. When the button is pressed, the intermediate presser height reference
value can be set. During the setting procedure, the intermediate presser height
reference value is indicated on edit data display S.
The intermediate presser height reference value is increased/decreased in
increments of 0.1 mm using PLUS button K or MINUS button L.
The speed of stitch of the sewing machine is indicated on the button. When
the button is pressed, the speed of stitch can be changed. During the setting
procedure, the current speed of the sewing machine is indicated on edit data
display S.
The max. speed limitation is increased/decreased in increments of 100 sti/min
using PLUS button K or MINUS button L.
The value for the selected item is increased in increments of the reference unit or
the needle is moved forward by one stitch.
The value for the selected item is decreased in increments of the reference unit
or the needle is moved backward by one stitch.
– 65 –
Description
p.36.
p.31.
p.38.