JUKI AMS-224EN-4530 Instruction Manuals page 93

No.
Enlarging/reducing function mode
Prohibited
Jog move function mode
Prohibited
Retainer compensation motion : selection of motion
Without motion
Selection of needle upper dead point at the time of origin
retrieval/return to origin
Without
Temporary stop : thread trimming operation
Automatic thread
trimming
Main motor X/Y feed synchronized control : speed/pitch
2500 sti/min/
3.0mm
1800 sti/min/
3.0mm
Intermediate presser with/without control
Without
(Lowering fixed)
Intermediate presser lowering timing
Immediately before
start-up of machine
head
Item
Increasing/decreasing
number of stitches
(Pitch is fixed.)
Parallel move
With motion
With
Manual (Thread trimming by
turning Stop SW ON again)
2200 sti/min/ 2000 sti/min/
3.0mm 3.0mm
(For the AMS-
224EN6060 only)
1400 sti/min/
3.0mm
With (Lowering with
sewing data at the time of
operation)
Synchronous to the feed frame
– 89 –
Setting range
4530/6030
Increasing/decreasing
pitch (Number of
stitches is fixed.)
2nd origin specified later
With (Lowering even at
the time of feed forward/
backward)
Edit unit
6060
--- ---
--- ---
--- ---
--- ---
--- ---
--- 1400 ---
sti/min/
3.0mm
to
2000
sti/min/
3.0mm
--- ---
--- ---