JUKI AMS-224EN-4530 Instruction Manuals page 60

Button and display
J
SEWING ORDER ADVANCE
button
K
TOTAL NUMBER OF
REGISTERS display
L
TOTAL NUMBER OF STITCHES
display
M
THREAD TENSION display
N
TRAVEL AMOUNT IN X
DIRECTION display
O
COUNTER VALUE CHANGE
button
P
COUNTER CHANGEOVER
button
Q
X ACTUAL SIZE AMOUNT
display
R
X SCALE RATE display
S
SPEED variable resistor
T
Y ACTUAL SIZE AMOUNT
display
U
Y SCALE RATE display
V
MAX. SPEED LIMITATION
display
W
TRAVEL AMOUNT IN Y
DIRECTION display
X
STEP SEWING button
Y
2-STEP STROKE display
Z
1-STEP REPEAT button
Pattern to be sewn can be advanced by one.
Total number of patterns which is registered to combination No. being sewn
is displayed.
Total number of stitches of sewing shape being sewn is displayed.
Thread tension value which is registered to pattern button No. being sewn
is displayed.
Travel amount in X direction which is registered to the pattern button No.
being sewn is displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to
"II-2-12. Using counter" p.38
The counter display can be changed over among the sewing counter, No.
of pcs. counter and bobbin counter.
→ Refer to
"II-2-12. Using counter" p.38
Actual X size value of the sewing shape which is registered to the pattern
button No. being sewn is displayed.
X scale rate of the sewing shape which is registered to the pattern button
No. being sewn is displayed.
Number of revolutions of the sewing machine can be changed.
Actual Y size value of the sewing shape which is registered to the pattern
button No. being sewn is displayed.
Y scale rate of the sewing shape which is registered to the pattern button
No. being sewn is displayed.
Maximum speed limitation which is registered to pattern button No. being
sewn is displayed.
Travel amount in Y direction which is registered to the pattern button No.
being sewn is displayed.
The step sewing screen is displayed. Checking the
pattern shape can be performed.
→ Refer to
"II-2-7. Checking pattern shape" p.31
2-step stroke value registered to the pattern button No. during sewing is
displayed.
Enable/disable of the 1-step repetition is selected.
： 1-step repeat is disabled
： 1-step repeat is enabled
– 56 –
Description
.
.
.