Changing Sewing Mode - JUKI AMS-224EN-4530 Instruction Manuals

B
G
D
E F

2-20. Changing sewing mode

③ Select the pattern No. of copy source.
Select the pattern button No. of copy source from the pattern
button list button B.
Next, press COPY DESTINATION INPUT button
the copy destination input screen is displayed.
C
④ Input the pattern No. of copy destination.
Input the pattern button No. of copy destination with ten keys D.
Pattern button No. which is not used yet can be retrieved with
– and + buttons
In addition, the folder to be stored can be selected with FOLD-
ER SELECTION button
⑤ Start copying.
When ENTER button
H
copied pattern button No. in the selection state returns to the
pattern button copy (copy source selection) screen after ap-
proximately two seconds.
* Combination data can be copied in the same way.
① Select the sewing mode.
When switch is pressed in the state that the pattern has
A
been registered, SEWING MODE SELECTION button
A is displayed on the screen. When this button is pressed, the
sewing mode changes alternately the individual sewing and
the combination sewing. (When the pattern button is not regis-
tered, the sewing mode cannot be changed to the combination
sewing even when the button is pressed.)
* The image of the button of sewing mode selection button
changes according to the sewing mode which is selected at
present.
When individual sewing is selected :
When combination sewing is selected :
– 52 –
(E and F).
G.
H is pressed, copying starts. The
C and