Warning: "Open Type Equipment." - Hitachi X200-002SFE/NFU Instruction Manuals

2−18
Prepare for Wiring
Step 5: It is very important to perform the wiring steps carefully and correctly. Before
5
proceeding, please study the caution and warning message herebelow.
WARNING: "USE 60/75°C Cu wire only" or equivalent.

WARNING: "Open Type Equipment."

WARNING: "Suitable for use on a circuit capable of delivering not more than 5,000 rms
symmetrical amperes, 240V maximum." For models with suffix S, N or L.
WARNING: "Suitable for use on a circuit capable of delivering not more than 5,000 rms
symmetrical amperes, 480V maximum." For models with suffix H.
HIGH VOLTAGE: Be sure to ground the unit. Otherwise, there is a danger of electric
shock and/or fire.
HIGH VOLTAGE: Wiring work shall be carried out only by qualified personnel.
Otherwise, there is a danger of electric shock and/or fire.
HIGH VOLTAGE: Implement wiring after checking that the power supply is OFF.
Otherwise, you may incur electric shock and/or fire.
HIGH VOLTAGE: Do not connect wiring to an inverter or operate an inverter that is
not mounted according to the instructions given in this manual. Otherwise, there is a
danger of electric shock and/or injury to personnel.
More user manuals on
ManualsBase.com