Table of Contents
Advertisement
70
en | Recording
10.1.3
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media list, activated, and configured for
storage.
Note:
A iSCSI target storage device can only be associated with one
user. If a target is being used by another user, ensure that the
current user no longer needs the target before decoupling that
user.
1.
2.
3.
4.
Note:
If older recordings are not allowed to be overwritten when the
available memory is full, the recording in question is stopped.
Specify limitations for overwriting old recordings by configuring
the retention time.
AM18-Q0635 | v5.6 | 2013.01
In the Storage overview section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives.
–
The medium is added as a target in the Managed
storage media list.
–
Newly added media is shown as Not active in the
Status column.
Click Set to activate all media in the Managed storage
media list.
–
The Status column shows all media as Online.
Check the box in the Rec. 1 or Rec. 2 column to specify the
recording tracks to be recorded on the target selected.
Check the Recording 1 or Recording 2 boxes for the
Overwrite older recordings option to overwrite the older
recording tracks once the available recording capacity has
been used.
Software manual
Camera Browser Interface
Bosch Security Systems
Advertisement
Table of Contents
