Meaning Of Error - Omron NX-ID3343 User Manual

9-3-3

Meaning of Error

This section describes the information that is given for individual errors.
Error Descriptions
The items that are used to describe individual errors (events) are described in the following copy of an
error table.
Event name Gives the name of the error.
Meaning Gives a short description of the error.
Source Gives the source of the error.
Error Level
attributes
Effects User program
Indicators Gives the status of the built-in EtherNet/IP port and built-in EtherCAT port indicators. Indicator status is
given only for errors in the EtherCAT Master Function Module and the EtherNet/IP Function Module.
System-defined Variable
variables
Lists the variable names, data types, and meanings for system-defined variables that provide direct
error notification, that are directly affected by the error, or that contain settings that cause the error.
Cause and Assumed cause
correction
Lists the possible causes, corrections, and preventive measures for the error.
Attached
This is the attached information that is displayed by the Sysmac Studio or an NS-series PT.
information
Precautions/ Provides precautions, restrictions, and supplemental information. If the user can set the event level,
Remarks the event levels that can be set, the recovery method, operational information, and other information
are also provided.
*1. One of the following:
Major fault: Major fault level
Partial fault: Partial fault level
Minor fault: Minor fault level
Observation
Information
*2. One of the following:
Automatic recovery: Normal status is restored automatically when the cause of the error is removed.
Error reset: Normal status is restored when the error is reset after the cause of the error is removed.
Cycle the power supply: Normal status is restored when the power supply to the Controller is turned OFF and then back
ON after the cause of the error is removed.
Controller reset: Normal status is restored when the Controller is reset after the cause of the error is removed.
Depends on cause: The recovery method depends on the cause of the error.
*3. One of the following:
System: System event log
Access: Access event log
*4. One of the following:
Continues: Execution of the user program will continue.
Stops: Execution of the user program stops.
Starts: Execution of the user program starts.
*5. "System information" indicates internal system information that is used by OMRON.
NX-series Digital I/O Unit User's Manual (W521)
Source
details
Tells the level of Recovery
influence on
*1
control.
Tells what will Operation
happen to exe-
cution of the
*4
user program.
Data type
Correction
9 Troubleshooting
Event code Gives the code of the error.
Gives details Detection
on the source timing
of the error.
Gives the Log category
recovery
*2
method.
Provides special information on the operation that
results from the error.
Name
Prevention
Tells when the
error is
detected.
Tells which log
the error is
*3
saved in.
*5
9
9 - 9