Omron NX-ID3343 User Manual page 284

Appendices
Terminal connection
CN1 (left) output terminal
diagram
12 to 24 VDC
• Be sure to wire both pins 3 and 4 (COM0) of CN1.
• Be sure to wire both pins 1 and 2 (+V0) of CN1.
CN2 (right) input terminal
24 VDC
• The polarity of the input power supply of CN2 can be connected in either direction.
• Be sure to wire both pins 3 and 4 (COM1) of CN2, and set the same polarity for both pins.
Disconnec- Not supported.
tion/Short-circuit
detection
A - 54
Signal Connector Signal
name pin name
OUT0 20 19 OUT8
L
OUT1 18 17 OUT9
L
OUT2 16 15 OUT10
L
OUT3 14 13 OUT11
L
OUT4 12 11 OUT12
L
OUT5 10 9 OUT13
L
OUT6 8 7 OUT14
L
OUT7 6 5 OUT15
L
COM0 4 3 COM0
+V0 2 1 +V0
Signal Connector Signal
name pin name
NC 1 2 NC
COM1 3 4 COM1
IN15 5 6 IN07
IN14 7 8 IN06
IN13 9 10 IN05
IN12 11 12 IN04
IN11 13 14 IN03
IN10 15 16 IN02
IN09 17 18 IN01
IN08 19 20 IN00
Protective function
L
L
L
L
L
L
L
L
Not supported.
NX-series Digital I/O Unit User's Manual (W521)