Omron NX-ID3343 User Manual page 63

 Units with MIL Connectors (1 Connector with 40 Terminals)
(A)
Let-
ter
(A) Marker attachment loca-
tion
(B) NX bus connector
(C) Unit hookup guides
(D) DIN Track mounting hooks These hooks are used to mount the NX Unit to a DIN Track.
(E) Protrusions for removing
the Unit
(F) Indicators
(G) Connectors
(H) Unit specifications
NX-series Digital I/O Unit User's Manual (W521)
(C) (D)
(B)
(H) (C) (E)
Name
The locations where markers are attached. The markers made by OMRON
are installed for the factory setting. Commercially available markers can also
be installed.
Refer to 4-1-2 Attaching Markers on page 4-4.
This connector is used to connect each Unit.
These guides are used to connect two Units.
The protrusions to hold when removing the Unit.
The indicators show the current operating status of the Unit.
Refer to 3-2 Indicators on page 3-9.
The connectors are used to connect to external devices.
The specifications of the Unit are given.
3 Part Names and Functions
(E) (C)
(F)
(G)
(C)
Function
(B)
3 - 7
3