Output Refreshing With Specified Time Stamp - Omron NX-ID3343 User Manual

5 I/O Refreshing
5-2-9

Output Refreshing with Specified Time Stamp

With this I/O refreshing method, the Output Units refresh outputs at the DC times specified by the user
program. The specified DC times are asynchronous to the NX bus refresh cycles.
The EtherCAT Coupler Unit cyclically sets the output set values and the DC times to refresh outputs to
the Output Units on the NX bus refresh cycles.
In the descriptions below, the DC time to refresh the output is called the specified time.
You can use the Input Units that support input refreshing with input changed time with the Output Units
that support output refreshing with specified time stamp to control outputs at fixed intervals after the
sensor inputs change.
5 - 24
NX-series Digital I/O Unit User's Manual (W521)