Basic Specifications - YASKAWA DX200 Instructions Manual

4 Basic Specifications

4 Basic Specifications
Explosion-proof marking
Pressure detector/
flow switch circuit
Solenoid valve circuit
Intrinsic
safe circuit
Battery circuit
Protective structure
Dimensions (Note 1)
Mass (Note 2)
DX200
Power Supply
Grounding
Noise
Installation
Ambient Temperature
Relative Humidity
Vibration
Others
Protective structure
Dimensions
Non explosion-
proof programming
pendant Ambient Temperature
(JZRCR-YPP21)
Ambient Temperature
Installation
Explosion-proof marking
Protective structure
Dimensions
Explosion-proof
programming
Ambient Temperature
pendant
(JZRCR-NPP07)
Ambient Temperature
Installation
Grounding
Note 1: Dimensions are subject to change depending on the type of the DX200.
Note 2: Mass is subject to change depending on the specifications of the DX200
Standard Unit
-
-
-
-
IP54 (back side fan part: IP2X）
600(W）×739(H)×520(D)
150kg (total of Standard unit + paint unit)
Three-phase 200VAC 50/60Hz
220VAC 60Hz
D-class grounding with ground resistance of 100 or less
62db or less
Non-hazardous area
During operation: 0 to +45℃
During transportation or when stored: -10～+60℃
10％～90％ (Non-condensing)
0.5G or less
Free from corrosive gas or liquid, or explosive gas
Free from exposure to water, oil, or dust
Free from large electrical noise (plasma)
IP65
169(W） × 314.5(H) × 50(D)
During operation: 0 to +45℃
During transportation or when stored: -10 to +60℃
10％～90％ (Non-condensing)
Non-hazardous area
Ex ib ⅡBT4
IP54
235(W） × 203(H) × 78(D)
During operation : 0 to +40℃ (Hazardous area）
During operation : 0 to +45℃ (Non-hazardous area）
During transportation or when stored:-10 to+60℃
10％～90％ (Non-condensing)
Hazardous area or non-hazardous area
A-class grounding with ground resistance of 10 or less
(Connected to the back side of the painting unit)
4-1
Painting Unit
［Exib］ⅡBGb Gb
Maximum voltage 13.2V
Maximum current 14.2mA
Maximum voltage 17.22V
Maximum current 220mA
Maximum voltage DC3.6V
Maximum current 81mA
（lithium thionyl chloride battery
（ER17500VLY）) (Note)
Note: mounted in the pressurized
enclosure which is in the manipulator.
600(W）×330(H)×520(D)
ｓingle-phase 200VAC 50/60Hz
220VAC 60Hz
Supplied from the standard unit
HW1483325
174117-1CD
16/33