Alert Annunciation Alarm (Aa Alarm) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: -
16.2.1.7
16.2.1.8
16.2.1.9
16.2.2
001 ZONE-ADDR 12-45 LAST ZONE 12
Re-enable zone: ZZ
This is a list of disabled zones. Scroll to or write the wanted zone
number and press "A". If more zones are to be re-enabled, repeat the
procedure.
Re-enable zone / address (X7)
001 ZONE-ADDR 12-45 LAST ZONE 12
Re-enable zone / address
Press "A". E.g.:
001 ZONE-ADDR 12-45 LAST ZONE 12
Re-enable zone: ZZ Address: 00
This is a list of disabled zone-addresses. Scroll to or write the wanted
zone-address and press "A". If more zone-addresses are to be re-
enabled, repeat the procedure.
Disable / Re-enable control (X8)
001 ZONE-ADDR 12-45 LAST ZONE 12
Disable/Re-enable control
Press "A". E.g.:
001 ZONE-ADDR 12-45 LAST ZONE 12
Dis(=0) or re-en(=1) control? 1
To disable, press "0" and "A". (To re-enable, press "1" and "A".). For
more information, see chapter "Disable all control, ventilation, exting
or interlocking outputs (H2/B4)", page 90.
Disable / Re-enable alarm devices (X9)
001 ZONE-ADDR 12-45 LAST ZONE 12
Disable/Re-enable alarm dev. ACCEPT?
Press "A". E.g.:
001 ZONE-ADDR 12-45 LAST ZONE 12
Dis(=0) or re-en(=1) alarm dev?1 ACCEPT?
To disable, press "0" and "A". (To re-enable, press "1" and "A".). For
more information, see chapter "Disable / re-enable alarm devices
(H2/B9), page 96.

Alert Annunciation alarm (AA alarm)

Alert Annunciation function turned on is indicated by the LED "Fire
brigade tx delay" (L16).
Indications, actions etc. for an AA alarm is as for a normal fire alarm
except that EBL128 output for routing equipment (Fire brigade
tx) will not be activated directly.
48
EBL128 Operating Instructions V2.0.x
No. 01
ACCEPT?
No. 01
ACCEPT? X7
No. 01
ACCEPT?
No. 01
ACCEPT? X8
No. 01
ACCEPT?
No. 01
X9
No. 01
The AA alarm has to be