Reset Activated Output (H8/S10) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
31.10
Action
"Access"
Scroll to menu H8.
"A"
Scroll to menu S10.
"A"
Depending on if 0, 1, 2
or 3 is selected one of
the alternatives will be
shown.
"A"
"Return"
"Return"
Rev: -

Reset activated output (H8/S10)

Output(s) activated via menu H8/S9 have to be reset via this menu
(H8/S10).
NOTE! Only output types that are activated will be shown and
possible to select.
Text in display
Maintenance
Acknowledge SERVICE signal
Reset activated output
Reset output type: 0
0=Loopunit 1=S 2=R0 3=EXPB
Reset output: 0, technical address 000
Reset S0
Reset R0
Reset output: 0, expansion board 0
Reset output type: 0
0=Loopunit 1=S 2=R0 3=EXPB
Reset activated output
Maintenance
EBL128 Operating Instructions V2.0.x
ACCEPT? H8
ACCEPT? S1
ACCEPT? S10
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT? S10
ACCEPT? H8
137
Comments
According to chapter
"Access", see page 81.
Only output types that are
activated will be shown.
Loop unit=3361 or 3364
S=S0-S1
R0=R0
EXPB= 4581 or 4583
L=A list in which you can
scroll. Select the output to
L
reset and press "A".
L
L
L
Only output types that are
activated will be shown.
When all outputs are reset,
--- List is empty ---
will be shown.
Scroll or press "Return" to
menu H8.
Scroll or press "Return".