Change Password (H10) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
33
Action
"Access"
Scroll to menu H10.
"A"
Enter the old and new
passwords and the new
password again.
"Return"
Rev: -

Change password (H10)

The password can be changed for the user (user name) that is logged
in but it is recommended to do it via EBLWin instead.
Text in display
Change password
Password: _
New password:
Password: ******
New password: ******
Incorrect password, NO change
Password is changed
Change password
As long as you don't close the door you can enter the menu system again
without a password.
NOTE! After change of password it is recommended do a "Safe
shutdown of the control unit" (see menu H8/S7). This will save the
SSW data (e.g. the new password) in a Flash ROM (see page 77).
If the valid password(s) are unknown, EBLWin has to be used to
change the password(s).
EBL128 Operating Instructions V2.0.x
ACCEPT? H10
Verify:
Verify: ******
ACCEPT? H10
143
Comments
According to chapter
"Access", see page 81.
The digits are replaced
(******) in the display.
Wrong password was
entered. Try again.
Correct password was
entered.
Scroll or press "Return" to
log off.