Event Log (H4/U6) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
27.6
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U6.
"A"
"0", "1" or "2"
"A"
"Return"
"Return"
"Return"
Rev: -

Event log (H4/U6)

Presentation of the events in EBL128 is divided into three event lists,
Alarm, Interlocking and General respectively. The event lists can also
be read via EBLWin and the Web-server II.
The most recent event is shown in the top of the list. The way the date
is presented could be different for different languages.
The initials of the person logged on to the system will also be shown
for each event when applicable (i.e. commands). Commands done via
EBLWin and the Web-server will also be shown.
NOTE! The event logging is disabled as long as this menu (H4/U6)
is open.
Text in display
Present system status
Disablement
Event log
Select event log: 0
0=Alarm 1=Interlocking
When "A" is pressed, an event will be shown in the display,
e.g:
FIRE ALARM zone 12 address 45
or
Command: Reset zone 32
or
FAULT: Output S1
acknowledged
Select event log: 0
0=Alarm 1=Interlocking
Event log
Present system status
EBL128 Operating Instructions V2.0.x
ACCEPT? H4
ACCEPT? U1
ACCEPT? U6
2=General
MM-DD HH:MM
MM-DD HH:MM
MM-DD HH:MM
2=General
ACCEPT? U6
ACCEPT? H4
109
Comments
According to chapter
"Access", see page 81.
Press "A" to accept.
Select type of event log.
The most recent event
will be shown, i.e. use
""
to scroll downwards
in the list.
xxx
xxx:
"Blank" = EBL128
Win = By EBLWin
xxx
Web = By Web-server
SP = By Service
Personnel
xxx
Select type or press
"Return" to menu U6.
Scroll or press "Return"
to menu H4
Scroll or press "Return".