Wps Screen - ZyXEL Communications LTE5366 Series User Manual

7.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Configuration > Network > Wireless LAN > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on
the LTE5366.
Figure 47 Configuration > Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 29 Configuration > Network > Wireless LAN > WPS
LABEL
WPS Setup 2.4G / 5G
WPS
PIN Code
PIN Number
WPS Status - 2.4G / WPS Status - 5G
Chapter 7 Wireless LAN
DESCRIPTION
Select Enable to turn on the WPS feature. Otherwise, select Disable.
Select Enable so the LTE5366 can connect by WPS using the PIN Configuration Method.
Select Disable so it can only connect by WPS using the Push Button Method.
This is the WPS PIN (Personal Identification Number) of the LTE5366. Enter this PIN in the
configuration utility of the device you want to connect to the LTE5366 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
LTE5366 Series User's Guide
82