Figure 88 Configuration > Application > NAS > File Sharing
The following table describes the labels in this screen.
Table 60 Configuration > Application > NAS > File Sharing
LABEL
File Sharing
Network Attached
Storage Name
Work Group
Server Comment
Cancel
Apply
19.3 FTP Screen
Use this screen to set up file sharing via the LTE5366 using FTP.
Click Configuration > Application > NAS > FTP to open the following screen.
Chapter 19 NAS
DESCRIPTION
Specify the name to identify the LTE5366 in a work group.
You can add the LTE5366 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your LTE5366 automatically joins. You can set the LTE5366's
workgroup name to be exactly the same as the workgroup name to which your computer
belongs to.
Note: The LTE5366 will not be able to join the workgroup if your local area network
has restrictions set up that do not allow devices to join a workgroup. In this
case, contact your network administrator.
Enter the description of the LTE5366 in a work group.
Click Cancel to begin configuring this screen afresh.
Click Apply to save your changes back to the LTE5366.
LTE5366 Series User's Guide
137