Wps Screen - ZyXEL Communications LTE4506-M606 User Manual

5.5 WPS Sc re e n
Use this screen to configure Wi-Fi Protected Setup (WPS) on your LTE4506.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Set up each WPS connection between two devices. Both devices must
support WPS. See
Note: To use the WPS feature, make sure you have wireless enabled in the
Se tting s
Note: If you want to use the WPS feature set the security type to
Click
Wi- Fi > WPS
Wi-Fi > WPS
Fig ure 23
The following table describes the labels in this screen.
Table 19 Wi-Fi > WPS
L ABEL
Select WPS
Interface
Select WPS
Method
WPS PIN
Chapter 5 Wi-Fi
Section 5.6.5.3 on page 45
screen.
. The following screen displays.
DESC RIPT IO N
Select (or ) to configure WPS.
SSID 1 SSID 2
• Select to set up a WPS wireless network using Push Button Configuration (PBC).
PBC
If you select , click
PBC Ac tiva te
range of the LTE4506) to your wireless network. This button may either be a physical button on
the outside of device, or a menu button similar to the
Note: You must press the other wireless device's WPS button within two minutes of
pressing this button.
• Select to set up a WPS wireless network by entering the PIN of the client into the LTE4506.
PIN
This field is available only when you set
Select this option and enter the PIN of the device that you are setting up a WPS connection with
and click to authenticate and add the wireless device to your wireless network.
Apply
You can find the PIN either on the outside of the device, or by checking the device's settings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the LTE4506.
LTE4506 User's Guide
for more information about WPS.
to add another WPS-enabled wireless device (within wireless
C o nne c t
Se le c t WPS Me tho d
38
>
Wi- Fi Wi- Fi
or .
WPA No ne
button on this screen.
to .
PIN