Pin Configuration - ZyXEL Communications LTE5366 Series User Manual

Note: Your LTE5366 has a WPS button located on its panel, as well as a WPS button in its
configuration utility. Both buttons have exactly the same function; you can use one or
the other.
Note: It doesn't matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The LTE5366 sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the LTE5366 securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both LTE5366 and wireless client (the Android 4.4.2 phone in this example).
Figure 21 Example WPS Process: PBC Method
Wireless Client

4.2.2 PIN Configuration

When you use the PIN configuration method, you need to use both LTE5366's configuration interface
and the client's utilities.
Launch your wireless client's configuration utility. Go to the WPS settings and select the PIN method to
1
get a PIN number.
Enter the PIN number to the PIN field in the Configuration > Network > Wireless LAN > WPS Station screen
2
on the LTE5366.
Chapter 4 Tutorials
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
LTE5366 Series User's Guide
35
AP
Press and hold
for more than
1 second