Dhcp Table; Arp Table - ZyXEL Communications LTE5366 Series User Manual

5.4 DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the LTE5366's LAN as a DHCP server or
disable it. When configured as a server, the LTE5366 provides the TCP/IP configuration for the clients. If
DHCP service is disabled, you must have another DHCP server on that network, or else the computer
must be manually configured.
Click Monitor > DHCP Table or Configuration > Network > DHCP Server > Client List. Read-only information
here relates to your DHCP status. The DHCP table shows current DHCP client information (including MAC
Address, and IP Address) of all network clients using the LTE5366's DHCP server.
Figure 25 Configuration > Monitor > DHCP Table
The following table describes the labels in this screen.
Table 10 Confiiguration > Monitor > DHCP Table
LABEL
#
Status
Host Name
IP Address
MAC Address
Reserve
Cancel
Apply

5.5 ARP Table

Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
Chapter 5 Monitor
DESCRIPTION
This is the index number of the host computer.
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Select this if you want to reserve the IP address for this specific MAC address.
Click Cancel to reload the previous configuration for this screen.
Click Apply to save your changes back to the LTE5366.
LTE5366 Series User's Guide
48