The Module Upgrade Screen - ZyXEL Communications LTE5366 Series User Manual

Figure 111 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 73 Maintenance > Firmware Upgrade
LABEL
File Path
Choose File
Upload
Note: Do not turn off the LTE5366 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the LTE5366
again.
The LTE5366 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 112 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the Firmware
Upgrade screen.

24.7 The Module Upgrade screen

Use this screen to upload new firmware specific to the built-in LTE module on the LTE5366 in order to
improve the LTE module's reliability and performance. Click Maintenance > Module Upgrade to open
the following screen.
Note: When you are using the Maintenance > Firmware Upgrade screen to upload the
LTE5366 Series firmware which is downloaded from the ZyXEL web site or FTP site, you are
also uploading firmware for the LTE module.
Chapter 24 Maintenance
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
LTE5366 Series User's Guide
165