Add Mac Address Screen; Wps Screen - ZyXEL Communications ARMOR G5 User Manual

10.4.1 Add MAC Addre ss Sc re e n
Use this screen to configure the MAC address you want to add to the MAC address list. Click
>
WiFi MAC Filte r
Settings > WiFi > MAC Filter > Add
Fig ure 60
The following table describes the labels in this screen.
Table 35 Settings > WiFi > MAC Filter > Add
L ABEL
Type
MAC Address
Apply
Cancel
10.5 WPS Sc re e n
Use this screen to enable/disable WPS, view or generate a new PIN and check the current WPS status.
Click
Se tting s
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on
the NBG7815.
Chapter 10 Wireless LAN
> to show the following screen.
Add
DESC RIPT IO N
This field displays the MAC address of the wireless station. If you select
enter the MAC address(es) manually.
Enter a MAC address manually in this field if you select
Click
Apply
Click
C a nc e l
> > to show the following screen.
WiFi WPS
NBG7815 User's Guide
to save your changes back to the NBG7815.
to exist this screen without saving.
113
Se tting s
Use r- De fine d
in the field.
Use r- De fine d T ype
>
,