ZyXEL Communications LTE5366 Series User Manual page 26

Chapter 2 Introducing the Web Configurator
Table 7 Navigation Panel (continued)
LINK TAB
NAT General
Port
Forwarding
Port Trigger
ALG
Dynamic DNS Dynamic DNS
Routing Static Route
Dynamic
Routing
Interface Interface
Group
Group
Security
Firewall General
Services
Content Filter Content Filter
IPv6 firewall Services
Application
SMS SMS
Voice over General
3G
Phone Book
Telephone
Conf.
Call Conf.
NAS File Sharing
FTP
Management
Remote WWW
Management
Remote
Management
Bandwidth General
Management
Advanced
UPnP UPnP
TR069 TR069
Maintenance
General General
Account User Account
Time Time Setting
FUNCTION
Use this screen to enable NAT.
Use this screen to configure servers behind the LTE5366 and forward incoming
service requests to the server(s) on your local network.
Use this screen to change your LTE5366's port triggering settings.
Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE5366.
Use this screen to set up dynamic DNS.
Use this screen to configure IP static routes.
Use this screen to enable and configure RIP on the LTE5366.
Use this screen to create a new interface group.
Use this screen to activate/deactivate the firewall.
This screen shows a summary of the firewall rules, and allows you to edit/add a
firewall rule.
Use this screen to restrict web features and designate a trusted computer. You
can also block certain web sites containing certain keywords in the URL.
Use this screen to configure IPv6 firewall rules.
Use this screen to send new messages and view messages received on the
LTE5366.
Use this screen to enable Vo3G on the LTE5366.
Use this screen to manage your Vo3G contact names and phone numbers.
Use this screen to configure call features.
Use this screen to maintain rules for handling incoming calls.
Use this screen to allow file sharing via the LTE5366 using Windows Explorer, the
workgroup name.
Use this screen to allow file sharing via the LTE5366 using FTP.
Use this screen to specify from which zones you can access the LTE5366 using
HTTP or HTTPS.
Use this screen to enable specific traffic directions for network services.
Use this screen to enable bandwidth management.
Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Use this screen to enable UPnP on the LTE5366.
Use this screen to configure your LTE5366 to be managed by an ACS.
Use this screen to view and change administrative settings such as system and
domain names.
Use this screen to change the user name and password of your LTE5366.
Use this screen to change your LTE5366's time and date.
LTE5366 Series User's Guide
26