More Ap Edit - ZyXEL Communications LTE5366 Series User Manual

The following table describes the labels in this screen.
Table 24 Configuration > Network > Wireless LAN > More AP
LABEL
#
Status
SSID
Security
Edit

7.4.1 More AP Edit

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The
following screen displays.
Figure 43 Configuration > Network > Wireless LAN > More AP: Edit
The following table describes the labels in this screen.
Table 25 Configuration > Network > Wireless LAN > More AP: Edit
LABEL
Active
Name (SSID)
Hide SSID
Chapter 7 Wireless LAN
DESCRIPTION
This is the index number of each SSID profile.
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
An SSID profile is the set of parameters relating to one of the LTE5366's BSSs. The SSID (Service Set
IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
This field indicates the security mode of the SSID profile.
Click the Edit icon to configure the SSID profile.
DESCRIPTION
Select this to activate the SSID profile.
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated.
Enter a descriptive name (up to 32 printable characters found on a typical English language
keyboard) for the wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
LTE5366 Series User's Guide
77