Wireless Wan (2G/3G/4G) Connection; Wireless Lan (Wi-Fi) Connection; File Sharing; Ways To Manage The Lte5366 - ZyXEL Communications LTE5366 Series User Manual

• Wireless WAN. Insert a 3G/4G SIM card into the SIM card slot to connect to a mobile network for
Internet access.

1.2.1 Wireless WAN (2G/3G/4G) Connection

The LTE5366 comes with a built-in 3G/4G module for 3G/4G connections. To set up a 3G/4G connection
using the built-in 3G/4G module, just insert a 3G/4G SIM card into the SIM card slot at the back of the
LTE5366.
Note: You must insert the 3G/4G SIM card into the card slot before turning on the LTE5366.

1.2.2 Wireless LAN (Wi-Fi) Connection

The LTE5366 is a wireless Access Point (AP) for wireless clients, such as notebook computers or PDAs and
iPads. It allows them to connect to the Internet without having to rely on inconvenient Ethernet cables.
By default, the wireless LAN (WLAN) is enabled on the LTE5366.

1.2.3 File Sharing

Use the built-in USB 2.0 port to share files on a USB memory stick or a USB hard drive (B). You can connect
one USB hard drive to the LTE5366 at a time. Use FTP/SAMBA to access the files on the USB device.

1.3 Ways to Manage the LTE5366

Use any of the following methods to manage the LTE5366.
• WPS (Wi-Fi Protected Setup). You can use the WPS button or the WPS section of the Web Configurator
to set up a wireless network with your LTE5366.
• Web Configurator. This is recommended for everyday management of the LTE5366 using a
(supported) web browser.
• TR-069. This is an auto-configuration server used to remotely configure your device.
Chapter 1 Introduction
LTE5366 Series User's Guide
14