Pin Configuration - ZyXEL Communications LTE3301 Series User Manual

Note: Your LTE3301 has a WPS button located on its panel, as well as a WPS button in its
configuration utility. Both buttons have exactly the same function; you can use one or
the other.
Note: It doesn't matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The LTE3301 sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the LTE3301 securely.
The following figure shows you an example to set up wireless network and security by pressing a button
on both LTE3301 and wireless client (the NWD210N in this example).
Example WPS Process: PBC Method
Fig ure 18
4.2.2 PIN C o nfig ura tio n
When you use the PIN configuration method, you need to use both LTE3301's configuration interface
and the client's utilities.
Launch your wireless client's configuration utility. Go to the WPS settings and select the PIN method to
1
get a PIN number.
Enter the PIN number to the
2
on the LTE3301.
Wireless Client
SECURITY INFO
COMMUNICATION
field in the
PIN
LTE3301 Series User's Guide
Chapter 4 Tutorials
WITHIN 2 MINUTES
C o nfig ura tio n > Ne two rk > Wire le ss L AN > WPS Sta tio n
31
Access Point
screen