Table of Contents
Advertisement
Note: Your NBG6816 has a WPS button located on its front panel, as well as a WPS button
in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The NBG6816 sends the proper configuration settings to the wireless client. This may take up to
two minutes. Then the wireless client is able to communicate with the NBG6816 securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both NBG6816 and wireless client (the NWD210N in this example).
Figure 29 Example WPS Process: PBC Method
8.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG6816's configuration
interface and the client's utilities.
Launch your wireless client's configuration utility. Go to the WPS settings and select the PIN method
1
to get a PIN number.
Enter the PIN number to the PIN field in the Expert > Wireless > WPS screen on the NBG6816.
2
Wireless Client
SECURITY INFO
COMMUNICATION
NBG6816 User's Guide
Chapter 8 Tutorials
WITHIN 2 MINUTES
47
Access Point
Advertisement
Table of Contents
