Omron CJ1W-ECT21 Operation Manual page 83

 Size of EtherCAT Slave Unit OUT Data Area in Bytes
Area size
0 bytes
50 bytes
100 bytes
200 bytes
400 bytes
IN Data Area Type
Use this device variable to specify the input word data area type that is used for receiving data from the
EtherCAT master (TxPDO).
Name of device variable
for CJ-series Unit
*_AlocInAreaType
*1. Expansion Data Memory (EM) areas vary for NJ-series CPU Unit models. Check the NJ-series CPU Unit spec-
ifications for bank availability.
 Memory Area Codes for the EtherCAT Slave Unit IN Data Area
Code
16#00
16#01
16#03
16#04
16#05
16#08 to 14
*1. Expansion Data Memory (EM) areas vary for NJ-series CPU Unit models. Check the NJ-series CPU Unit spec-
ifications for bank availability.
CJ-series EtherCAT Slave Units Operation Manual for NJ-series CPU Unit (W542)
Setting value
0
50
100
200
400
Type R/W
BYTE RW
Area type in memory for CJ-series Unit
---
CIO Area (CIO)
Data Memory (DM)
Work Area (WR)
Holding Area (HR)
Expansion Data Memory (EM)
*1
Bank 0 to Bank C
3 Data Exchange with the CPU Unit
Name
IN data area type Specifies the IN data area memory
type.
Data range: 16#00 to 14
Default: 16#00
Function
*1
3 - 21
3