Sony BVW-55 Maintenance Manual page 57

2. Unthreading end state
In the unthreading end state, the S and T sliders move from the S and T catchers to the reel table side, and
then stop. At the same time, the S tension regulator arm and T tension regulator arm are located in the
positions shown in the figure. This state is the same as the standby. In this case, the cassette compartment
is put into the up state.
. To enter the unthreading end state;
Turn on the power and press the EJECT button.
. To enter the unthreading end state manually;
Turn the manual eject knob counterclockwise until the cassette compartment is up.
m
. Stop the rotation of the manual eject knob after becoming the cassette compartment in the up posi-
tion. In case that the cassette compartment is removed, stop the rotation of the knob after moving the
release lever in the direction of the arrow to the position indicated by the dotted line.
. For how to enter the unthreading end state with the cassette tape inserted, refer to Section 1-11.
S slider
S tension regulator arm
BVW-55
1-18. Threading End and Unthreading End States
Manual eject knob
T slider
T tension regulator arm
Release lever
1-47