Cleaning; Using Cleaning Tape; General Information For The Use Of Cleaning Cloth - Sony BVW-55 Maintenance Manual

Hide thumbs Also See for BVW-55:
Table of Contents

Advertisement

4-2. Cleaning

4-2. Cleaning
To make the most of the functions, fully realize the performance of this unit, and to lengthen the life of
the unit and tape, clean the components often.

4-2-1. Using Cleaning Tape

If the video heads are clogged, clean the video head by the following procedure.
Make sure to use the specified cleaning tape. If other tape is used, unusual abrasion or damage of the
video heads may occur.
Specified cleaning tape:
BCT-5CLN
Procedure
1. Press the EJECT button.
Then the cassette compartment is opened.
2. Insert the Cleaning tape BCT-5CLN to the unit.
3. Push the control panel down to close the control panel.
4. Press the EJECT and PLAY buttons simultaneously.
The cleaning tape is played back for approx. 5 seconds. After that, the cleaning tape will be ejected
automatically.
m
. If the cleaning tape is not ejected after playing back more than 5 seconds, be sure to press the
EJECT button immediately and eject the cleaning tape.
. Do not be place the cleaning tape in the STOP mode, and do not put the unit in fast-forward and
rewind mode, because the video heads may be damaged.
5. Confirm that the head clogging is clear.
If the video heads are still clogged after cleaning by cleaning tape, clean them by cleaning cloth. (Refer
to Section 4-2-3.)

4-2-2. General Information for the Use of Cleaning Cloth

1. Cautions
. Be sure turn the power off before cleaning.
. Each block in the mechanical deck consists of a precision part and is adjusted precisely. Be careful not
to damage each part and to apply an excessive force during cleaning.
. Do not touch the greased portions during cleaning. If grease attaches to cleaning cloth, replace the
cleaning cloth with a new one. If a cleaning cloth smeared with grease is used, grease may attach to
the places where it should not.
. Do not insert a cassette tape before a cleaning fluid completely evaporates after cleaning.
2. Preparation
(1) Turn the power off.
(2) Remove the upper frame. (Refer to Section 1-6-2.)
(3) Remove the cassette compartment. (Refer to Section 1-7.)
4-4
BVW-55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents