Sony BVW-55 Maintenance Manual page 201

A24 : INPUT CF DETECT
AUDIO/VIDEO ADJUST MODE
A24:INPUT CF DETECT
1
*
Manual
2
INPUT CF DETECT
SCH 0
3
SFTZ 0
SFTP 0
This menu is used to adjust the color frame detection timing
of a composite video input signal.
Preparation (refer to Section 7) is required for the adjustment.
n
This adjustment is necessary to perform both 525/60 and
625/50 systems.
Description of LCD monitor
1 The adjustment mode (manual and automatic adjust-
ments) or the messages during automatic adjustment
are displayed in this line.
Manual :
Auto (Push SET Button): Press the SET button to
Auto Adjusting ... :
Auto adjust Complete :
Auto Adjust Failure :
n
The adjustment data can be manually changed even if
message "Auto (Push SET Button)" is displayed.
2 The adjustment item and adjustment data value are
displayed in this line.
3 Each status is displayed as "0" or "1".
0: When the specification is not satisfied
1: When the specification is satisfied
(For SFTP, the status is displayed in alternate "0" and
"1" when the specification is satisfied.)
BVW-55 P2
9E
Adjustment mode is set to
the manual adjustment.
initiate the automatic
adjustment.
Automatic adjustment is in
progress.
Automatic adjustment is
completed.
Automatic adjustment fails.
2-2. TAPE Maintenance Mode (M0)
2-2-4. AUDIO/VIDEO ADJUST Mode (A2)
2-25