Sony BVW-55 Maintenance Manual page 225

14. Remove the six screws, then remove the SV-206 board.
PWH1.4 x 3.5
Positioning hole
15. Reinstall the mechanical deck assembly in the reverse order of removal.
n
Perform the confirmation or adjustment below after the mechanical deck assembly is removed and
installed.
. Tape running check or adjustment
. Video tracking check or adjustment
. CTL head position check or adjustment
. AT head position check or adjustment
BVW-55 P2
Cam gear shaft
3-1. General Information on Parts Replacement and Alignment
Positioning hole
PWH1.4 x 3.5
S tension regulator shaft
Mechanical deck assembly
SV-206 board
3-13