5. T tension drawer arm assembly
removal
(1) Remove the stop washer, and then remove
the band aligning plate.
(2) Remove the stop washer, and then remove
the T tension drawer arm assembly.
6. Cam gear assembly removal
(1) Mark either of the tooth of the cam gear
assembly and the tooth of the midway gear
which are meshed each other, using a twee-
zers.
(2) Lift the cam gear assembly out.
BVW-55 P2
Stop washer
T tension drawer arm assembly
Intermittent gear
Midway gear
Cam gear assembly
4-13. Cam Gear Assembly Replacement
Stop washer
Band aligning
plate
Marking
Intermittent gear
Midway gear
4-45