Sony BVW-55 Maintenance Manual page 328

4-17-1. Backlight Replacement
3. Backlights installation
(1) Put the hooks of the new backlights into the
holes on the LCD monitor, and move them in
the arrow directions. Then tighten them with
the four screws.
(2) Attach the LCD monitor with the four
screws.
(3) Connect the harness connectors of the
backlights to connectors CN2 and CN3 on the
inverter board.
(4) Install the inverter board with the two screws.
(5) Clamp the harness of the backlight using the
harness clamp as shown in the figure.
4. DP-300 board installation
(1) Connect the connector CN7 of the DP-300
board to the CN-1541 board.
(2) Reinstall the DP-300 board with the four
screws.
(3) Reconnect the harness connector disconnect-
ed in (1) of step 1 to CN6 on the DP-300
board.
4-56
BVTT2 x 5
Hole
BVTT2 x 5
B2 x 4
Backlight
LCD monitor
Hole
Harness clamp
B2 x 4
CN3
Backlight
B2 x 4
Hook
Hole
Holes
B2 x 4
CN2
Inverter board
BVW-55 P2