Sony BVW-55 Maintenance Manual page 189

A001 : S REEL FG DUTY
A002 : CAPSTAN FG DUTY
A003 : CAPSTAN FRICTION
These menus are used to perform the automatic adjust-
ments below.
A001 : S reel FG duty adjustment
A002 : Capstan FG duty adjustment
A003 : Capstan friction adjustment
To execute the automatic adjustments
(1) Press the SET button.
. The automatic adjustment is initiated when the SET
button is pushed.
The execution time is about 15 seconds for A001 to
A003.
. Message "ADJUSTING......" is displayed on only
the LCD monitor during automatic adjustment.
(2) Confirm the adjustment result.
. Message "ADJUST COMPLETE" is displayed on
the LCD monitor when the automatic adjustment is
completed normally.
. Message "# ADJUST INCOMPLETE #" is dis-
played on the LCD monitor when no adjustment
can be performed. The automatic adjustment is
then interrupted. Refer to the "For Automatic
Adjustment Failure" on page 2-16 when this
message is displayed.
(3) Press the MENU button to terminate the menu.
(4) To save the adjustment data in the NV-RAM of a
servo system, execute the SAVE SERVO ADJUST
data in an A006 : NV-RAM CONTROL menu.
BVW-55 P2
Example of display and operation
Example of A001 : S REEL FG DUTY
SERVO ADJUST
A001:S REEL FG DUTY
[SET]
(1) 0
SERVO ADJUST
A001:S REEL FG DUTY
ADJUSTING......
0
SERVO ADJUST
A001:S REEL FG DUTY
ADJUST COMPLETE
(2)
0
Confirm
[MENU]
(3)
0
(4)
0
Data save
* A006:NV-RAM CONTROL
SERVO ADJUST
A001:S REEL FG DUTY
# ADJUST INCOMPLETE #
# S REEL TROUBLE
Ex.: When failing the automatic adjustment
2-2. TAPE Maintenance Mode (M0)
2-2-2. SERVO ADJUST Mode (A0)
#
2-13