Denso RC7M Manual page 8

1. Introduction
2. Warning Labels
(Example: Location of labels)
This section provides safety precautions to be observed for the
robot system.
The installation shall be made by qualified personal and should
confirm to all national and local codes.
The robot unit and controller have warning labels. These labels
alert the user to the danger of the areas on which they are
pasted. Be sure to observe the instructions printed on those
labels.
Warning label
Label (1)
<Except HM>
<HM>
Label (2)
Label (3)
Label (4)
Instructions printed on the label
Risk of injury.
Never enter the restricted space.
For UL-Listed robot units only
Risk of injury.
This label alerts the user that pressing
the brake release switch could drop the
arm.
Risk of electrical shock.
Never open the controller cover when
the power is on.
Never touch the inside of the controller
for at least 3 minutes even after turning
the power off and disconnecting the
power cable.
Risk of injury.
Be sure to perform lockout/tagout
before starting servicing.
Turning the power ON when a person is
inside the safety fence may move the
arm, causing injuries.