Adjust The Media Size For The Bulk Media Module - Canon imagePRESS C7010VPS Operating Information Manual

#
IMPORTANT
If you place the paper directly on the lifter without setting the deck base plate, the
loaded paper may hang over the lifter, and paper jams may occur.
Never place the deck base plate in the empty part of the paper tray. Doing so may
lead to a malfunction of the printer.
Load the size sheet and make sure to set the size change plate and rear edge retainer
properly before loading paper into the paper tray. If the size change plate and rear
edge retainer are not properly set, the paper tray may become damaged.
Load the paper stack into the paper tray, and then lower the feeding support roller.
18.
#
When loading paper into the paper tray, take care not to cut your hands on the
edges of the paper.
#
IMPORTANT
To load paper larger than B4, you have to first close the paper tray to raise the
inside lifter, then open the paper tray, and load the paper. If you load paper larger
than B4 when the inside lifter is at its lowest position, the paper may not be
loaded properly, and paper jams may occur.
Never place paper or any other items in the empty part of the paper tray. Doing
so may lead to a malfunction of the copier.
#
NOTE
When loading paper, make sure that the height of the paper stack does not exceed
20 mm. If the height of the paper stack exceeds 20 mm, the edges of the paper stack
may become curled or creased, and poor print quality may result.
Adjust the media size for the bulk media module (optional)
CAUTION
Chapter 9 - Paper, toner, and staples 249