Load The Media Into The Bulk Media Module - Canon imagePRESS C7010VPS Operating Information Manual

Make sure that the inside lifter has lowered before loading paper, even out the edges of
the paper stack, and stack the paper neatly against the inner paper guide.
#
IMPORTANT
Do not load paper into the paper tray that has been previously printed onto, as
this may result in a malfunction or damage to the copier. Always use the special
feeder to feed paper when you want to print onto the back of a sheet of paper that
already has something copied on its front side (2nd side of 2- Sided print).
Use of the paper tray with the feeding support roller detached, may cause paper
jams.
Make sure that the size change plate is properly aligned with the marks of the de-
sired paper size. If the size change plate is not properly aligned, the paper tray may
become damaged.
Paper which has been rolled or curled must be straightened out before loading it
into the paper tray.
Make sure that the height of the paper stack does not exceed the loading limit
mark on the inside of the paper tray.
Load the media into the bulk media module (optional)
Chapter 9 - Paper, toner, and staples 239