Roller - Canon imagePRESS C7010VPS Operating Information Manual

'Refresh the fixing roller'
Introduction
When paper with a longer width is used after copying or printing 100 or more sheets of
paper with a shorter width (for example, when you use A3 paper after A4R paper), luster
streak may appear on both edges in the feeding direction. In addition, patches of uneven
gloss may appear in the high density areas of the printed heavy paper or coated paper. In
this case, the streaks and patches of uneven gloss may be reduced by refreshing the fixing
roller and cleaning its surface.
#
IMPORTANT
Refreshing the fixing roller decreases the lifetime of the fixing roller largely.
#
NOTE
Refreshing the fixing roller cannot be performed during printing.
Illustration
A4
[480] The feeding direction (1) and luster streaks (2)
Refresh the fixing roller
Touch 'System' -> 'Maintenance'.
1.
Press 'Start maintenance'.
2.
Touch 'Refresh the fixing roller' and touch 'Start' .
3.
Enter the maintenance PIN and touch 'OK'.
4.
A wizard opens.
Press 'Next'.
5.
A status message displays.
1
A3
Chapter 11 - Maintenance and calibration
'Refresh the fixing roller'
2
341