Correct skewed and rotated images
Introduction
This procedure describes how to correct skewed or slightly rotated images. See the figure
below.
#
IMPORTANT
The correction applies to all media.
You are advised to use the largest possible media size.
Required tool
Ruler
Illustration
Perform a deskew
Touch 'System' -> 'Media'.
1.
From the 'Media catalog', select the media you want to use.
2.
The correction applies to all media.
Press 'Skew correction'.
3.
An instruction windows opens.
Read the instructions carefully and touch 'Next'.
4.
Please wait while a media registration sheet is printed.
Check the registration sheet
5.
If the registration sheet is correct, you can stop the deskew procedure.
If the registration sheet is wrong, continue with the next step.
An instruction window opens.
Follow the instructions on the window.
6.
Correct skewed and rotated images
Chapter 6 - Print jobs
145