Size - Canon imagePRESS C7010VPS Operating Information Manual

Adjust the paper tray to hold a different media size
Adjust the paper tray to hold a different media size
Introduction
Before you can load media with a different media size, you must adjust the paper tray.
#
NOTE
If the printer is in the sleep mode, you may not be able to open the paper tray even
if you press the open button. In this case, press the control panel power switch to re-
activate the machine, and then press the open button.
Adjust the paper tray to hold a different media size
Press the button on the paper tray that you want to adjust, and pull out the paper tray
1.
until it stops. When the inside lifter automatically descends to the paper loading position,
lift the paper holder plate and remove all of the remaining paper.
#
IMPORTANT
If the printer is in the sleep mode, you may not be able to open the paper tray even
if you press the open button. In this case, press the control panel power switch to re-
activate the machine, and then press the open button.
230 Chapter 9 - Paper, toner, and staples