Shift The Image Precisely To Create Binding Space Or Correct The Lay Out - Canon imagePRESS C7010VPS Operating Information Manual

Shift the image precisely to create binding space or correct the layout
Shift the image precisely to create binding space or correct
the layout
Introduction
If you want to create space for staples or punch holes, for example, you can use the 'Align'
function. However, when the 'Align' function is not precise enough, you can use the
'Margin shift' and 'Image shift' functions. These functions allow you to shift the image
more precisely. The preview in the right-hand pane of the operator panel displays the
consequences of your changes. If you shift the margin too much, you may loose part of
the image.
The 'Shift' function has 2 options.
'Margin shift' allows you to increase or decrease the margin to create more binding
space, for example. With 'Margin shift', you can shift an image relative to the binding
edge.
'Image shift' has basically the same function. However, 'Image shift' also allows you
to move the image vertically. This gives you more freedom in moving the image exactly
to the desired position.
#
NOTE
By default, the values of the front side and the back side are linked. To define different
values for each side, touch . The changes you make are valid for the whole document,
not only for the current page.
How to shift the margin and the image
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job you want to change.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button 2x).
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
3.
Touch the 'Shift' button.
4.
Make the required changes.
5.
Press 'OK'.
6.
Press 'OK'.
7.
162 Chapter 6 - Print jobs
after you stopped the