Scan to file
How to use the scan-to-file function
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
1.
Touch 'Jobs' -> 'Copy/Scan'.
2.
Select a scan-to-file profile.
3.
The job window opens.
Change the settings for the original and the file.
4.
Touch 'Start' .
5.
The scanner scans the originals. The system sends the resulting file to the scan server.
The file is stored with a predefined name in a designated directory. There is no message
on the operator panel to inform you that the file was stored successfully. You can access
the status information on the controller.
Scan to file
Chapter 8 - Scan jobs
215